Best Coffee Maker With Grinder (2026): Three Useful All-in-Ones
Brew
A coffee maker with a grinder can turn whole beans into a pot before you are fully awake. These three picks cover better grind control, dependable value, and easy cleanup.
Our picks
A grind-and-brew machine handles two jobs in one appliance. It grinds whole beans, moves the grounds into a filter, and brews the coffee. That saves counter space and can put a fresh pot on a timer without asking you to operate a separate grinder at 6 a.m.
The tradeoff is simple. An all-in-one machine needs more cleaning than a normal drip brewer, and most budget models use a blade grinder rather than a burr grinder. The convenience is real, but only if you are willing to rinse the parts that touch damp grounds after every pot.
For other all-in-one and filter setups, see the brew category.
Burr vs blade, and a chute you will rinse
A burr grinder feeds beans between two abrasive surfaces. The gap controls grind size, so the bed extracts more evenly. That is why the Gevi tastes more like a real drip pot and less like an office machine.
A blade grinder chops. Some pieces become powder while others stay large. It is cheaper and compact, which is why it shows up in the Cuisinart and BLACK+DECKER. Fine for a weekday timer pot. Less fine if you buy light-roast beans and want tight control.
Every model here mixes dry beans with a wet brew path. Moisture in the chute makes coffee dust stick. Empty the filter, rinse removable pieces, and let them dry. Skip that and the next pot tastes like yesterday.
The three picks at a glance
Shop: Gevi Grind & Brew · Cuisinart Grind & Brew · BLACK+DECKER Mill and Brew
Best overall: Gevi 10-Cup Grind & Brew with Built-In Burr Grinder
The Gevi Grind & Brew is the best fit for someone who wants an all-in-one machine but still cares about grind adjustment. Its built-in burr grinder is the important difference. Burrs crush beans more evenly than blades, which gives the brewer a better chance of extracting the coffee without mixing fine dust and large pieces.
The touchscreen keeps the daily routine simple. You can set the batch anywhere from 4 to 10 cups, program it up to 24 hours ahead, and fine-tune the coffee-to-water ratio with the grind-cup setting. That range is useful in a household where weekdays call for one mug but weekends call for a full pot.
It keeps the pot warm on a heating plate for 60 to 240 minutes, and you can trim that window to match your morning. It is not low maintenance, though. Keep the chute clean and dry, because oily beans can stick and leave stale grounds behind for the next pot.
Check price: Gevi 10-Cup Grind & Brew with Built-In Burr Grinder on Amazon
Best value: Cuisinart Automatic Grind & Brew 12-Cup
The Cuisinart Automatic Grind & Brew 12-Cup is the established value choice. It makes up to 12 cups, can be programmed up to 24 hours ahead, and has a 1-to-4-cup setting for smaller batches. A grind-off mode lets you use pre-ground coffee when you want decaf or do not want to run the grinder.
This model uses a blade grinder. It does not offer the same particle consistency or adjustment as the Gevi's burr. For a normal automatic drip pot, that may be an acceptable compromise. It is less appealing if you regularly buy light-roast specialty beans.
Cleaning is the bigger decision. The grinder basket and filter area collect both coffee dust and moisture, so they need to come out after brewing. Owners who rinse and dry the pieces every day get a much better pot than owners who let damp grounds sit inside.
The glass carafe sits on a hot plate. Drink the pot within about an hour, or pour leftovers into a mug. The plate will keep cooking what you leave behind. Blade noise is a short chop, louder than many people expect at 6 a.m.
Check price: Cuisinart Automatic Grind & Brew 12-Cup on Amazon
Easiest to clean: BLACK+DECKER Mill and Brew CM5000B
The BLACK+DECKER 12-Cup Mill and Brew CM5000B takes a simpler approach. Its blade grinder sits with the reusable filter in one removable assembly. Once the pot is finished, you can remove that section, empty the grounds, and rinse it without taking apart several hidden pieces.
That design is the main reason to buy it. You still get programmable brewing and a choice of brew strength, but you do not get detailed grind-size control. The machine asks you to decide how many beans to add, then handles the grinding and brewing in the same basket.
This model suits a household that wants fresh-ground convenience at a modest price. It is not the right pick if you want a burr grinder or a machine with a mostly metal brewing path. The body and water system use more plastic than the Gevi.
Check price: BLACK+DECKER Mill and Brew CM5000B on Amazon
What to check before buying
Measure the space above your counter. These machines need room for the bean hopper and water reservoir to open. A model may fit under a cabinet but still be awkward to refill unless you pull it forward every day.
Think about the amount you actually brew. A 12-cup label uses small coffee-maker cups, not 12 large mugs. If you usually make one travel cup, the Gevi's serving flexibility may be more useful than a large glass carafe.
Check the carafe type too. A glass carafe sits on a warming plate and lets you see how much coffee remains. A thermal carafe keeps coffee warm without cooking it on a hot plate, but it is heavier and needs careful rinsing.
If you want full control or plan to use several brew methods, a separate coffee grinder and drip coffee maker remain the better long-term setup. You can replace either piece without replacing both.
How to keep a grind-and-brew machine working
Start with dry parts. Moisture in the grinder area makes coffee dust stick, which can clog a chute or leave stale grounds for the next pot. After brewing, empty the filter, rinse removable pieces, and let them dry before reassembly.
Use medium or medium-dark beans if you want the easiest routine. Very oily dark beans can cling to a hopper and chute. If you love an oily roast, check the pathway more often and follow the manufacturer's cleaning directions.
Descale the water side separately from cleaning the grinder. Mineral buildup affects heating and water flow, while coffee oils affect flavor and moving parts. The machine needs both jobs. Follow the manual for the recommended descaling solution and cycle.
Store opened beans in an airtight container instead of leaving a large amount in the hopper for weeks. Our guide to the best coffee storage containers explains what helps and what is mostly decoration.
Which coffee maker with grinder should you buy?
Buy the Gevi Grind & Brew if you want the best grind quality in this group, make different batch sizes, and do not mind paying more for a burr grinder. It offers the most useful control, but it also expects regular care.
Buy the Cuisinart Grind & Brew if you want a familiar 12-cup programmable machine and accept blade grinding plus daily cleaning.
Buy the BLACK+DECKER Mill and Brew if fast cleanup and a lower price are your priorities. Its combined grinder and filter assembly is simple. Just know that it offers less grind control and uses more plastic.
None of these replaces a separate grinder and brewer for someone who enjoys changing equipment and fine-tuning every pot. For everyone else, an all-in-one can make fresh whole-bean coffee much easier to fit into a weekday morning.
Frequently Asked Questions
Is a coffee maker with a grinder worth it?
Yes, if one-button convenience matters more than having complete control over the grinder and brewer separately. It is especially useful when you want a fresh pot ready on a timer. A separate burr grinder is still better for changing brew methods or upgrading one part at a time.
Do grind-and-brew coffee makers use burr grinders?
Some do. The Gevi Grind & Brew uses a burr grinder, while the Cuisinart Grind & Brew and BLACK+DECKER CM5000B use blade-style grinding systems. Burrs generally produce more even grounds and offer better adjustment.
Can I use pre-ground coffee in these machines?
Yes. All three can brew pre-ground coffee when you turn off or bypass the grinding step. This is useful for decaf, flavored coffee, or mornings when you need a quieter start.
How often should I clean a coffee maker with a grinder?
Rinse the grinder basket, filter, and carafe after every pot. Brush or wipe the bean chute as the manual directs, especially with oily beans. Descale the water system on the manufacturer's schedule or sooner if your water is hard.
Can I program a coffee maker with whole beans overnight?
Yes, these machines can be loaded and programmed before bed. Keep the grinder area dry, use only the amount of water and beans needed, and do not leave oily beans sitting in a warm hopper for long periods.
Will the grinder wake an apartment?
Blade grinders are a short, loud chop. The Gevi burr is a longer grind. If 6 a.m. quiet matters, grind the night before or use pre-ground and skip the mill that morning.